bachelor-thesis/thesis/content/20_state.tex

\chapter{Technical Background}
\label{chap:state}

% Hier werden zwei wesentliche Aufgaben erledigt:

% 1. Der Leser muß alles beigebracht bekommen, was er zum Verständnis
% der späteren Kapitel braucht. Insbesondere sind in unserem Fach die
% Systemvoraussetzungen zu klären, die man später benutzt. Zulässig ist
% auch, daß man hier auf Tutorials oder Ähnliches verweist, die hier auf
% dem Netz zugänglich sind.

% 2. Es muß klar werden, was anderswo zu diesem Problem gearbeitet
% wird. Insbesondere sollen natürlich die Lücken der anderen klar
% werden. Warum ist die eigene Arbeit, der eigene Ansatz wichtig, um
% hier den Stand der Technik weiterzubringen? Dieses Kapitel wird von
% vielen Lesern übergangen (nicht aber vom Gutachter ;-), auch später
% bei Veröffentlichungen ist "Related Work" eine wichtige Sache.

% Viele Leser stellen dann später fest, daß sie einige der Grundlagen
% doch brauchen und blättern zurück. Deshalb ist es gut,
% Rückwärtsverweise in späteren Kapiteln zu haben, und zwar so, daß man
% die Abschnitte, auf die verwiesen wird, auch für sich lesen
% kann. Diese Kapitel kann relativ lang werden, je größer der Kontext
% der Arbeit, desto länger. Es lohnt sich auch! Den Text kann man unter
% Umständen wiederverwenden, indem man ihn als "Tutorial" zu einem
% Gebiet auch dem Netz zugänglich macht.

% Dadurch gewinnt man manchmal wertvolle Hinweise von Kollegen. Dieses
% Kapitel wird in der Regel zuerst geschrieben und ist das Einfachste
% (oder das Schwerste weil erste).

This chapter introduces the relevant technologies and concepts for this thesis. The goal of this thesis is to apply the \glsentrylong{dsa} to the concept of \glsentrylong{qdp}, therefore we will familiarize ourselves with both of these terms. We also give background on \glsentrylong{hbm}, which is a secondary memory technology to the \glsentryshort{dram} used in current computers.

\section{\glsentrylong{hbm}}
\label{sec:state:hbm}

\glsentrylong{hbm} is an emerging memory technology that promises an increase in peak bandwidth. It consists of stacked \glsentryshort{dram} dies \cite[p. 1]{hbm-arch-paper} and is gradually being integrated into server processors, with the Intel® Xeon® Max Series \cite{intel:xeonmaxbrief} being one recent example. \gls{hbm} on these systems can be configured in different memory modes, most notably, HBM Flat Mode and HBM Cache Mode \cite{intel:xeonmaxbrief}. The former gives applications direct control, requiring code changes, while the latter utilizes the \gls{hbm} as a cache for the system's \glsentryshort{dram}-based main memory \cite{intel:xeonmaxbrief}. \par

\todo{find a nice graphic for hbm}

\section{\glsentrylong{qdp}}

\begin{figure}[h!tb]
    \centering
    \includegraphics[width=0.7\textwidth]{images/simple-query-graphic.pdf}
    \caption{Illustration of a simple query in (a) and the corresponding pipeline in (b). \cite[Fig. 1]{dimes-prefetching}}
    \label{fig:qdp-simple-query}
\end{figure}

\gls{qdp} introduces a targeted strategy for optimizing database performance by intelligently prefetching relevant data. To achieve this, \gls{qdp} analyses queries, splitting them into distinct sub-tasks, resulting in the so-called query execution plan. An example of a query and a corresponding plan is depicted in Figure \ref{fig:qdp-simple-query}. From this plan, \gls{qdp} determines columns in the database used in subsequent tasks. Once identified, the system proactively copies these columns into faster memory during the execution of the pipeline. For the example (Figure \ref{fig:qdp-simple-query}), column \texttt{b} is accessed in \(SCAN_b\) and \(G_{sum(b)}\) and column \texttt{a} is only accessed for \(SCAN_a\). Therefore, only column \texttt{b} will be chosen for prefetching in this scenario. \cite{dimes-prefetching} \par

\section{\glsentrylong{dsa}}

\blockquote{Intel \gls{dsa} is a high-performance data copy and transformation accelerator that will be integrated in future Intel® processors, targeted for optimizing streaming data movement and transformation operations common with applications for high-performance storage, networking, persistent memory, and various data processing applications. \cite[Ch. 1]{intel:dsaspec}}

Introduced with the \(4^{th}\) generation of Intel Xeon Scalable Processors, the \gls{dsa} aims to relieve the CPU from \enquote{common storage functions and operations such as data integrity checks and deduplication} \cite[p. 4]{intel:xeonbrief}. To fully utilize the hardware, a thorough understanding of its workings is essential. Therefore, we present an overview of the architecture, software, and the interaction of these two components, delving into the architectural details of the \gls{dsa} itself. All statements are based on Chapter 3 of the Architecture Specification by Intel. \par

\todo{comment by andre: Wirkt mir etwas knapp, vllt etwas mehr erklären. Z.B.: auch die Problematik mit dem Aufwand um das Kopieren schnell genug zu machen (viele Threads) -> das gibt dann auch den Ansatz punkt um zu sagen, was wir uns von der DSA erhoffen (Kontext, warum wir QdP überhaupt einführen). Und z.B.: welchen Trick wir angewandt haben um den Kopieraufwand gering zu halten.}

\todo{zeigen wo ich mit der dsa ansetze}

\subsection{Hardware Architecture} \label{subsection:dsa-hwarch}

\begin{figure}[h!tb]
    \centering
    \includegraphics[width=0.9\textwidth]{images/block-dsa-hwarch.pdf}
    \caption{\glsentrylong{dsa} Internal Architecture. Shows the components that the chip is made up of, how they are connected and which outside components the \glsentryshort{dsa} communicates with.  \cite[Fig. 1 (a)]{intel:analysis}}
    \label{fig:dsa-internal-block}
\end{figure}

The \gls{dsa} chip is directly integrated into the processor and attaches via the I/O fabric interface, serving as the conduit for all communication. Through this interface, the \gls{dsa} is accessible as a PCIe device. Consequently, configuration utilizes memory-mapped registers set in the devices \gls{bar}. Through these registers, the devices' layout is defined and memory pages for work submission set. In a system with multiple processing nodes, there may also be one \gls{dsa} per node, resulting in up to four DSA devices per socket in \(4^{th}\) generation Intel Xeon Processors \cite[Sec. 3.1.1]{intel:dsaguide}. To accommodate various use cases, the layout of the \gls{dsa} is software-defined. The structure comprises three components, which we will describe in detail. We also briefly explain how the \gls{dsa} resolves virtual addresses and signals operation completion. At last, we will detail operation execution ordering. \par

\subsubsection{Architectural Components}

\textsc{Component \rom{1}, \glsentrylong{dsa:wq}:} \gls{dsa:wq}s provide the means to submit tasks to the device and will be described in more detail shortly. They are marked yellow in Figure \ref{fig:dsa-internal-block}. A \gls{dsa:wq} is accessible through so-called portals, light blue in Figure \ref{fig:dsa-internal-block}, which are mapped memory regions. Submission of work is done by writing a descriptor to one of these. A descriptor is 64 bytes in size and may contain one specific task (task descriptor) or the location of a task array in memory (batch descriptor). Through these portals, the submitted descriptor reaches a queue. There are two possible queue types with different submission methods and use cases. The \gls{dsa:swq} is intended to provide synchronized access to multiple processes and each group may only have one attached. A \gls{pcie-dmr}, which guarantees implicit synchronization, is generated via \gls{x86:enqcmd} and communicates with the device before writing \cite[Sec. 3.3.1]{intel:dsaspec}. This may result in higher submission cost, compared to the \gls{dsa:dwq} to which a descriptor is submitted via \gls{x86:movdir64b} \cite[Sec. 3.3.2]{intel:dsaspec}. \par

\textsc{Component \rom{2}, Engine:} An Engine is the processing-block that connects to memory and performs the described task. To handle the different descriptors, each Engine has two internal execution paths. One for a task and the other for a batch descriptor. Processing a task descriptor is straightforward, as all information required to complete the operation are contained within \cite[Sec. 3.2]{intel:dsaspec}. For a batch, the \gls{dsa} reads the batch descriptor, then fetches all task descriptors from memory and processes them \cite[Sec. 3.8]{intel:dsaspec}. An Engine can coordinate with the operating system in case it encounters a page fault, waiting on its resolution, if configured to do so, while otherwise, an error will be generated in this scenario \cite[Sec. 2.2, Block on Fault]{intel:dsaspec}. \par

\textsc{Component \rom{3}, Groups:} Groups tie Engines and \glsentrylong{dsa:wq}s together, indicated by the dotted blue line around the components of Group 0 in Figure \ref{fig:dsa-internal-block}. This means, that tasks from one \gls{dsa:wq} may be processed from multiple Engines and vice-versa, depending on the configuration. This flexibility is achieved through the Group Arbiter, represented by the orange block in Figure \ref{fig:dsa-internal-block}, which connects the two components according to the user-defined configuration. \par

\subsubsection{Virtual Address Resolution}

An important aspect of modern computer systems is the separation of address spaces through virtual memory. Therefore, the \gls{dsa} must handle address translation because a process submitting a task will not know the physical location in memory, causing the descriptor to contain virtual addresses. To resolve these to physical addresses, the Engine communicates with the \gls{iommu} to perform this operation, as visible in the outward connections at the top of Figure \ref{fig:dsa-internal-block}. Knowledge about the submitting processes is required for this resolution. Therefore, each task descriptor has a field for the \gls{x86:pasid} which is filled by the \gls{x86:enqcmd} instruction for a \gls{dsa:swq} \cite[Sec. 3.3.1]{intel:dsaspec} or set statically after a process is attached to a \gls{dsa:dwq} \cite[Sec. 3.3.2]{intel:dsaspec}. \par

\subsubsection{Completion Signalling}
\label{subsubsec:state:completion-signal}

The status of an operation on the \gls{dsa} is available in the form of a record, which is written to a memory location specified in the task descriptor. Applications can check for a change in value in this record to determine completion. Additionally, completion may be signalled by an interrupt. To facilitate this, the \gls{dsa} \enquote{provides two types of interrupt message storage: (1) an MSI-X table, enumerated through the MSI-X capability; and (2) a device-specific Interrupt Message Storage (IMS) table} \cite[Sec. 3.7]{intel:dsaspec}. \par

\subsubsection{Ordering Guarantees}

Ordering of operations is only guaranteed for a configuration with one \gls{dsa:wq} and one Engine in a Group when exclusively submitting batch or task descriptors but no mixture. Even in such cases, only write-ordering is guaranteed, implying that \enquote{reads by a subsequent descriptor can pass writes from a previous descriptor}. Challenges arise, when an operation fails, as the \gls{dsa} will continue to process the following descriptors from the queue. Consequently, caution is necessary in read-after-write scenarios. This can be addressed by either waiting for successful completion before submitting the dependent descriptor, inserting a drain descriptor for tasks, or setting the fence flag for a batch. The latter two methods inform the processing engine that all writes must be committed, and in case of the fence in a batch, to abort on previous error. \cite[Sec. 3.9]{intel:dsaspec} \par

\subsection{Software View}
\label{subsec:state:dsa-software-view}

\begin{figure}[h!tb]
    \centering
    \includegraphics[width=0.5\textwidth]{images/block-dsa-swarch.pdf}
    \caption{\glsentrylong{dsa} Software View. Illustrating the software stack and internal interactions from user applications, through the driver to the portal for work submission. \cite[Fig. 1 (b)]{intel:analysis}}
    \label{fig:dsa-software-arch}
\end{figure}

Since Linux Kernel 5.10, there exists a driver for the \gls{dsa} which has no counterpart in the Windows OS-Family \cite[Sec. Installation]{intel:dmldoc} and other operating systems. Therefore, accessing the \gls{dsa} is only possible under Linux. To interact with the driver and perform configuration operations, Intel's accel-config \cite{intel:libaccel-config-repo} user-space toolset can be utilized. This application provides a command-line interface and can read configuration files to set up the device. The interaction is depicted in the upper block titled \enquote{User space} in Figure \ref{fig:dsa-software-arch}. It interacts with the kernel driver, visible in light green and labelled \enquote{IDXD} in Figure \ref{fig:dsa-software-arch}. After successful configuration, each \gls{dsa:wq} is exposed as a character device through \texttt{mmap} of the associated portal \cite[Sec. 3.3]{intel:analysis}. \par

With the appropriate file permissions, a process could submit work to the \gls{dsa} using either the \gls{x86:movdir64b} or \gls{x86:enqcmd} instructions, providing the descriptors by manual configuration. However, this process can be cumbersome, which is why \gls{intel:dml} exists. \par

With some limitations, like lacking support for \gls{dsa:dwq} submission, this library presents an interface that takes care of creation and submission of descriptors, and error handling and reporting. Thanks to the high-level-view the code may choose a different execution path at runtime which allows the memory operations to either be executed in hardware or software. The former on an accelerator or the latter using equivalent instructions provided by the library. This makes code using this library automatically compatible with systems that do not provide hardware support. \cite[Sec. Introduction]{intel:dmldoc} \par

\section{Programming Interface for \glsentrylong{dsa}}
\label{sec:state:dml}

As mentioned in Section \ref{subsec:state:dsa-software-view}, \gls{intel:dml} offers a high level interface for interacting with the hardware accelerator, specifically Intel \gls{dsa}. Opting for the C++ interface, we will now demonstrate its usage by example of a simple memcopy implementation for the \gls{dsa}. \par

\begin{figure}[h!tb]
    \centering
    \includegraphics[width=0.9\textwidth]{images/nsd-dsamemcpy.pdf}
    \caption{\glsentrylong{dml} Memcpy Implementation Pseudocode. Performs copy operation of a block of memory from source to destination. The \glsentryshort{dsa} executing this copy can be selected with the parameter \texttt{node}, and the template parameter \texttt{path} elects whether to run on hardware (Intel \glsentryshort{dsa}) or software (CPU).}
    \label{fig:dml-memcpy}
\end{figure}

In the function header of Figure \ref{fig:dml-memcpy} two differences from standard memcpy are notable. Firstly, there is the template parameter named \texttt{path}, and secondly, an additional parameter \texttt{int node}. Both will be discussed in the following paragraphs. \par

The \texttt{path} parameter allows the selection of the executing device, which can be either the CPU or \gls{dsa}. The options include \texttt{dml::software} (CPU), \texttt{dml::hardware} (\gls{dsa}), and \texttt{dml::automatic}, where the latter dynamically selects the device at runtime, favoring \gls{dsa} over CPU execution \cite[Sec. Quick Start]{intel:dmldoc}. \par

Choosing the engine which carries out the copy might be advantageous for performance, as we can see in Section \ref{subsec:perf:datacopy}. With the engine directly tied to the processing node, as observed in Section \ref{subsection:dsa-hwarch}, the node ID is equivalent to the ID of the \gls{dsa}. \par

\gls{intel:dml} operates on data views, which we create from the given pointers to source and destination and size. This is done using \texttt{dml::make\_view(uint8\_t* ptr, size\_t size)}, visible in Figure \ref{fig:dml-memcpy}, where these views are labelled \texttt{src\_view} and \texttt{dst\_view}. \cite[Sec. High-level C++ API, Make view]{intel:dmldoc} \par

In Figure \ref{fig:dml-memcpy}, we submit a single descriptor using the asynchronous operation from \gls{intel:dml}. This uses the function \texttt{dml::submit<path>}, which takes an operation type and parameters specific to the selected type and returns a handler to the submitted task. For the copy operation, we pass the two views created previously. The provided handler can later be queried for the completion of the operation. After submission, we poll for the task completion with \texttt{handler.get()} and check whether the operation completed successfully. \par

A noteworthy addition to the submission-call is the use of \texttt{.block\_on\_fault()}, enabling the \gls{dsa} to manage a page fault by coordinating with the operating system. It's essential to highlight that this functionality only operates if the device is configured to accept this flag. \cite[Sec. High-level C++ API, How to Use the Library]{intel:dmldoc} \cite[Sec. High-level C++ API, Page Fault handling]{intel:dmldoc}

\section{System Setup and Configuration} \label{sec:state:setup-and-config}

In this section we provide a step-by-step guide to replicate the configuration being used for benchmarks and testing purposes in the following chapters. While Intel's guide on \gls{dsa} usage was a useful resource, we also consulted articles for setup on Lenovo ThinkSystem Servers for crucial information not present in the former. It is important to note that instructions for configuring the HBM access mode, as mentioned in Section \ref{sec:state:hbm}, may vary from system to system and can require extra steps not covered in the list below. \par

\begin{enumerate}
    \item Set \enquote{Memory Hierarchy} to Flat \cite[Sec. Configuring HBM, Configuring Flat Mode]{lenovo:hbm}, \enquote{VT-d} to Enabled in BIOS \cite[Sec. 2.1]{intel:dsaguide} and, if available, \enquote{Limit CPU PA to 46 bits} to Disabled in BIOS \cite[p. 5]{lenovo:dsa}
    \item Use a kernel with IDXD driver support, available from Linux 5.10 or later \cite[Sec. Installation]{intel:dmldoc} and append the following to the kernel boot parameters in grub config: \texttt{intel\_iommu=on,sm\_on} \cite[p. 5]{lenovo:dsa}
    \item Evaluate correct detection of \gls{dsa} devices using \texttt{dmesg | grep idxd} which should list as many devices as NUMA nodes on the system  \cite[p. 5]{lenovo:dsa}
    \item Install \texttt{accel-config} from repository \cite{intel:libaccel-config-repo} or system package manager and inspect the detection of \gls{dsa} devices through the driver using \texttt{accel-config list -i} \cite[p. 6]{lenovo:dsa}
    \item Create \gls{dsa} configuration file for which we provide an example under \texttt{benchmarks/configuration-files/8n1d1e1w.conf} in the accompanying repository \cite{thesis-repo} that is used for most benchmarks available. Then apply the configuration using \texttt{accel-config load-config -c [filename] -e} \cite[Fig. 3-9]{intel:dsaguide}
    \item Inspect the now configured \gls{dsa} devices using \texttt{accel-config list}  \cite[p. 7]{lenovo:dsa}, output should match the desired configuration set in the file used
\end{enumerate}

%%% Local Variables:
%%% TeX-master: "diplom"
%%% End: